This is an old revision of the document!

Step 9 – Install Pitman Arms

New Parts needed for this step:

Pitman Arm Pins (2)
Equalizer
Pitman Arms (2)

Step 9.1 – Identify parts

The pitman arm pins are the small cylinders on top. The equalize is in the middle flanked by pitman arms. The equalize and pins are bidirectional. The pitman arms are identical.

The upper pitman arms are obvious very thin. This part can be easily broken if care is not taken.

Step 9.2 – Place pitman arms

Place one pitman arm on each side of the equalizer as shown.

Though the pitman arms are identical, they do have a direction. The side with the concave opening faces outward.

Step 9.3 –

placeholder

Step 9.4 – Place pitman arm pins

Insert one pitman arm pin in each socket.

Step 9.5 –

Push the pins in until they are flush.

⬅ Previous Step

Next Step ➜

OILMAN

Table of Contents