3d_prints:instructions:conventional:step12

This is an old revision of the document!

Table of Contents

Step 12 – Install Crank Arms
- Step 12.1 – Crank alignment
- Step 12.2 – Proper install

Step 12 – Install Crank Arms

New Parts needed for this step:

Crank assemblies

Step 12.1 – Crank alignment

Each crank has a slotted socket at one end. The cranks are installed on the crank gear shaft using this socket.

Step 12.2 – Proper install

Once installed, the cranks should rotate downwards. Thanks gravity.

⬅ Previous Step

3d_prints/instructions/conventional/step12.1773509142.txt.gz · Last modified: 2026/03/14 17:25 by unexpectedlee