Conventional Pumping Unit Assembly

This guide walks through assembling the conventional pumping unit model.

• Step 1 – Install Gearbox
• Step 2 – Install Reducer Base
• Step 3 – Install Gears
• Step 4 – Install Gear & Drive Shafts
• Step 5 – Install Motor & Motor Platform
• Step 6 – Install Posts
• Step 7 – Install Horsehead
• Step 8 – Install Walking Beam
• Step 9 – Install Pitman Arms
• Step 10 – Install Equalizer Beam
• Step 11 – Install Weights
• Step 12 – Install Crank Arms
• Step 13 – Install Wrist Pin
• Step 14 – Install Motor Shaft
• Step 15 – Install Belts
• Step 16 – Completed Unit
• Step 17 – Optional Step: Belt Guard